Missouri hazardous wastes: 10 Missouri Code of State Regulations (CSR) 25-4.261(2)(D)
Polychlorinated biphenyls (PCBs): 10 CSR 25-13.010(3)
Missouri Department of Natural Resources (DNR) Division of Environmental Quality Hazardous Waste Program
See ADDRESSES & CONTACTS for addresses and telephone numbers.
See national section for basic information and federal regulations.
• Rules. Missouri adopts by reference the federal lists of hazardous waste and has identified certain materials containing specific levels of polychlorinated biphenyls (PCBs) as hazardous wastes.
• Administration and enforcement. DNR's Hazardous Waste Program administers and enforces the listed hazardous waste requirements in Missouri.
MISSOURI HAZARDOUS WASTES
10 CSR 25-4.261(2)(D)
As of December 30, 2015, Missouri deleted these wastes from its list of state hazardous wastes requiring a state hazardous waste code:
The state no longer requires that used oil that cannot be or is not intended to be recycled use Missouri hazardous waste code D098.
10 CSR 25-13.010(3)
In addition to the federal list of hazardous wastes, Missouri has identified certain materials containing specific levels of PCBs as hazardous wastes and identifies these wastes with the letter "M" preceding a state-designated number. Consult the state section PCB MANAGEMENT for a review of Missouri's PCB hazardous waste listed wastes.
Low-concentration PCB used oil is any used oil that contains equal to or greater than 2 parts per million (ppm) PCBs but less than 50 ...